Asian Scalper

Best Asian Session Scalper! Supports 9 currency pairs:
GBPUSD, GBPCHF, GBPCAD, EURGBP, EURCAD, EURCHF, USDJPY, USDCHF and USDCAD

WHAT IS ASIAN SCALPER?

Asian Scalper is a fully automated forex robot. It is an advanced Asian session scalper which supports 9 currency pairs. The robot is equiped with all need systems for secure trading on forex exchange market.

Asian Scalper LIVE PERFORMANCE

Check below Asian Scalper Live Performance on Myfxbook.
Click over the chart and you will be redirected to Myfxbook where you can analyze Asian Scalper results.
Asian Scalper expert advisor Live Performance

SUPPORTED CURRENCY PAIRS

Asian Scalper supports 9 currency pairs. These pairs are: GBPUSD, GBPCHF, GBPCAD, EURGBP, EURCAD, EURCHF, USDJPY, USDCHF and USDCAD. You can trade on all currency pairs simultaneously. This will increase the trading frequency and your profit as well. Of course you can trade with any supported currency pairs.

ASIAN SCALPER TOP FEATURES

Below you can find top features of Asian Scalper:

Automated trading

The robot can trade automatially and manage its own trades! No need to make manual interventions!

Advanced Money Management

The robot is equiped with advanced money management system. The robot can calculate the risk based on your account balance and the risk you want to trade.

Easy to use

No need to make any configurations. The robot comes with default settings which are already optimized for each supported currency pair.

Spread and Slippage protection

Protect your account from unfavorable market conditions.

Hidden SL and TP

The robot can hide the Stop Loss and Take Profit from the broker.

Compatible with all brokers

The robot can work with all brokers and account types.

Very low drawdown

Due to small Stop Loss values of supported currency pairs the dradown is very low.

Loss recovery system

The robot has a loss recovery system which may help you to recover previous losses quickly by increasing the lot size with small amounts.

E-MAIL AND MOBILE PUSH NOTIFICATION SYSTEMS

Asian Scalper comes with E-mail and Mobile PUSH Notifications Systems. Now it is easier to follow up Asian Scalper trades. Thanks to the new notification systems integrated in the robot you can immediately be notified for all new trades and closed trades. Both notification systems are disabled by default. To learn how to enable and use them please continue reading below.

ADDITIONAL TRADES SYSTEM

The new version of Asian Scalper comes with Additional Trades System. This system dramatically improves Asian Scalper performance and makes it less broker dependent. The Additional Trades System makes Asian Scalper grid strategy. When Additional Trades System is enabled the robot opens additional trades when the initial trade is negative. The additional trades are in the same direction as the initial one. This lets Asian Scalper to close the trades quickly and always on profit. Additional Trades System is disabled by default. When enabled it will use our best optimization for each supported pairs. Of course it can be configured precisely from the users. Check the below image!

ASIAN SCALPER BACK-TEST RESULTS

Below you can find back-test results of Asian Scalper on all supported currency pairs. We have tested Asian Scalper precisely with historical data to show how it performs on each of the supported currency pairs.

Asian Scalper EURCHF Back-test (1999-2017)

Asian Scalper EURCHF Back-test (1999-2017)

$44k

Profit in money

6.75

Profit factor

0.49%

Max Drawdown

88.72%

Profit trades

Asian Scalper GBPCHF Back-test (1999-2017)

Asian Scalper GBPCHF Back-test (1999-2017)

$87k

Profit in money

5.28

Profit factor

2.27%

Max Drawdown

84.71%

Profit trades

Asian Scalper EURGBP Back-test (1999-2017)

Asian Scalper EURGBP Back-test (1999-2017)

$14k

Profit in money

2.94

Profit factor

2.85%

Max Drawdown

78.15%

Profit trades

Asian Scalper EURCAD Back-test (2006-2017)

Asian Scalper EURCAD Back-test (2006-2017)

$11k

Profit in money

2.35

Profit factor

2.15%

Max Drawdown

74.48%

Profit trades

Asian Scalper GBPCAD Back-test (2007-2017)

Asian Scalper GBPCAD Back-test (2007-2017)

$13k

Profit in money

3.52

Profit factor

1.85%

Max Drawdown

77.38%

Profit trades

Asian Scalper GBPUSD Back-test (1999-2017)

Asian Scalper GBPUSD Back-test (1999-2017)

$15k

Profit in money

1.76

Profit factor

3.22%

Max Drawdown

77.97%

Profit trades

Asian Scalper USDCAD Back-test (1999-2017)

Asian Scalper USDCAD Back-test (1999-2017)

$11k

Profit in money

1.96

Profit factor

2.29%

Max Drawdown

74.05%

Profit trades

Asian Scalper USDCHF Back-test (1999-2017)

Asian Scalper USDCHF Back-test (1999-2017)

$13k

Profit in money

1.80

Profit factor

2.33%

Max Drawdown

74.63%

Profit trades

Asian Scalper USDJPY Back-test (1999-2017)

Asian Scalper USDJPY Back-test (1999-2017)

$9k

Profit in money

1.58

Profit factor

3.41%

Max Drawdown

77.79%

Profit trades

ASIAN SCALPER SETTINGS

Asian Scalper can be precisely configured and adapted to cover all forex traders needs and expectations. Below you can find the complete list of available settings.
Main Settings

Stop_Loss - Stop Loss value in standard pips. The robot will close the trades when the loss is equal to Stop_Loss.

Take_Profit - Take Profit value in standard pips. The robot will close the trades when the profit is equal to Take_Profit.

Slipage - Maximum allowed slippage in standard pips.

Max_Spread - Maximum allowed spread in standard pips for trading. If the current spread is greater than value of Max_Spread the robot will not open a trade.

Hidden_Mode - When its value is TRUE the robot will hide Stop Loss and Take Profit from the broker. If you don't have a stable power supply and internet connection don't enable this option.

Close_On_Profit - When its value is TRUE the robot will close the trades only on profit or when the price hits the stop loss value.

Magic_Number - An unique integer number which will be assigned to all open trades from the robot. Make sure that it is unique because this number help to robot to locate its own trades. If you use one magic number for different forex robots on your account then the robots will manage each others trades and this will lead to losses.

Robot_Comment - A text which will be added as a comment to all open trades. By default it is "FX365 Asian Scalper". You can set what you want.

Money Management Settings

Risk - Value in percents. When its value is greater than 0 (zero) then the robot calculates the lots size automatically based on Risk value and account free margin.

Lots - Fixed Lots size. If you want to trade with fixed lots then you have to set Risk=0 and set a proper value to Lots parameter according to your account free margin.

Loss_Recovery - Loss recovery system. When enabled the robot check whether there are any previous losses. If there are then it starts to increase the lots size of next trades with small amounts. This way it compnesate the previous losses. When the previous losses are compensated the robot continue trading with normal risk. For correct recovery the MM must be enabled: Risk > 0.

Max_Recovery_Risk - The maximum risk in percents which will be used from the robot durign recovery process.

GMT Offset Settings

GMT_Offset - GMT offset of your broker. Always set the winter GMT offset of your broker. It is very important to be properly set. Otherwise the robot may have bad results.

Trading Strategy Settings

Trading_Hours - The hours when the robot can trade if there are good conditions. It is a broker based time.

Channel_Period - The period parameter of the main indicators.

Exit_Distance - A break in pips that triggers closing of a trade.

Entry_Break - A break in pips that triggers opening of a trade.

Min_Volatility - Minimum market volatility needed for trading.

Exit_Profit_Pips - A minimum profit (loss for a negative value) on which a trade will be closed from the main exit logic of the robot.

Reverse_Profit - A minimum profit on which a trade will be closed, if a market reverse is detected.

Exit_Minutes - When this amount of minutes exceeds a trade will be closed, if the current profit is greater or equal to the Time_Profit_Pips parameter.

Time_Profit_Pips - A profit in pips (loss for a negative value) on which a trade will be closed. Second conditions is the trade existence time must exceeds the Exit_Minutes parameter value.

Monday Settings

Monday_Start_Hour - Usefull parameter if you want to avoid Monday gaps. It works with broker time. For example if you set Monday_Start_Hour=10 then Asian Scalper will not open any trades before 10:00 broker time.

Friday Settings

Friday_Last_Trade_Hour - The robot will trade until the end of this hour.

Friday_Close_Trades - TRUE: enable closing of trades on Friday, FALSE: disable closing.

Friday_Close_Hour - The hour when the robot to close the trades on Friday.

Friday_Close_Minutes - The minutes when the robot to close the trades on Friday.

Additional Trades Settings

Additional_Trades - When this parameter is TRUE the robot will open additional trades when the initial trade is negative. The additional trades are in the same direction as the initial one. This let Asian Scalper to close the trades quickly and always on profit.

Max_Add_Trades - Maximum number of additional trades which the robot may open.

Add_Trades_Distance - Minimum distance between the additional trades in pips.

Open_Add_By_Signal - This parameter has 3 possible values: YES, NO and DEFAULT. When its value is YES, the additional trades will be opened only by signal generated by special indicators, mathematical calculations and the value of the parameter Add_Trades_Distance. If its value is NO, then the robot will check only the parameter Add_Trades_Distance value. If its value is DEFAULT, then the most optimized value for the current currency pair will be used.

Add_Trades_Signal_TF - The time frame of the main indicator used in Additional Trades System when taking decision to open an additional trade or not to open. The robot will use this value only when Open_Add_By_Signal is YES.

Add_Trades_Lots_Multiplier - This parameter controls the lot size of the additional trades. By default, the lot size is equal to the initial trade lot size (Add_Trades_Lots_Multiplier=1). If the value of this parameter is lower than 1 then the additional trades will be opened with lower lot size than the initial trade. If the value is greater than 1 then the additional trades will be opened with greater lot size than the initial trade. Add_Trades_Lots_Multiplier is a multiplier and you can easily calculate the additional trades lot size. For example, if the initial trade lot size is 0.1 lot and you set Add_Trades_Lots_Multiplier=1.5 then additional trades lot size will be: 0.1 x 1.5 = 0.15 lots

Take_Profit_With_Adds - Take Profit value in pips when there are opened additional trades. When the total profit of initial trade and the additional trades is greater or equal to Take_Profit_With_Adds value the robot will close all opened trades.

Take_Profit_Money_With_Adds - Take Profit value in money (usually your account base currency). This parameter is very useful in case that you have set Add_Trades_Lots_Multiplier greater than 1. This means that the additional trades will be with greater lot size than initial trade. In such cases it is better to use take profit in money instead pips. It is easier to recover and the trades will be closed quickly.

Stop_Loss_With_Adds - Stop Loss value in pips when there are opened additional trades. When the total loss of initial trade and the additional trades is greater or equal to Stop_Loss_With_Adds value the robot will close all opened trades.

Notification Settings

Email_Notification - When its value is TRUE the email notification will be enabled. In order to use properly this type of notification you have to configure your MT4 terminal Email configurations correctly. You can find them in: MT4->Tools->Options->Email

Mobile_Push_Notification - When its value is TRUE Mobile PUSH notification will be enabled. In order to use properly this type of notification you have to do:
- Set Mobile_Push_Notification=true
- Enable mobile push notifications in MT4->Tools->Options->Notifications
- Enter you Metaquotes ID in MT4->Tools->Options->Notifications

HOW TO TEST OR BUY ASIAN SCALPER?

If you want to test Asian Scalper for free or to buy it and use it on your real-money account please click the below button. You will be redirected to the MQL5 website where you will be able to get it.

If you have any questions about Asian Scalper feel free to contact us!

Our support team will respond you within 1-2 business day/s.

Get in Touch with Us

We will be happy to answer your questions!

We would love to hear from you. Please send us your questions, comments or concerns by filling out the form on the right. We will do our best to get back to you as quickly as possible, usually within 1-2 business days.

Or you can send your message difrectly to our email address: support@fxrobots365.com

Subscribe to our Newsletter

Enter your email and stay informed on our forex robots!